NEWLAND SETS RECORD WITH BUCYRUS EQUIPMENT
Using a Bucyrus EL3000 shearer, Xstrata's Newlands Northern
underground mine
-- in the Bowen Basin, Queensland, Australia -- set a new
Australian annual production record in 2009. At 9,159,490 US
tons, the record is an increase of 9.1 percent on the previous
high of 8,408,038 US tons set in 2007 by Xstrata's Beltana in
NSW, also operating with a Bucyrus EL3000 shearer. In May 2009,
Newlands Northern Mine also set a new Australian monthly
productivity record of 961,891 tons. The mine further improved
on this by extracting 1,016,794 tons in October 2009.
Productivity at the Newlands Northern Mine has been steadily
increasing in the four years since a Bucyrus EL3000 shearer was
installed in 2006. The 8.3 million tons extracted in 2009 is
getting close to double the 4.49 million tons mined in the first
year of operation.
The Newlands Northern Mine longwall is completely
Bucyrus-equipped. The longwall works with an EL3000 shearer
with total installed power of 1,590 kW including cutting power
of 2x650 kW. The shearer is fully automation-capable and works
off a Jumbotrack 2000 rackbar haulage system with haulage power
of 2x125 kW. The longwall is further equipped with 181 two-leg
roof supports with a yield load of 913 tons and a working range
of 3-5 meters, automated with Bucyrus's PM 4 electrohydraulic
control system.
The face conveyor for the 312 m longwall is a Bucyrus PF 5/1342
with a 48 mm x 144/160 combi-chain and a 3 x 855 kW CST drives.
The 375 kW PF 4/1532 beam stage loader and 400 kW SK 11/18 coal
crusher are also supplied by Bucyrus.
The Newlands mine produces export thermal coal from underground
and open-cut operations in an extremely competitive
environment. It is located 130 km west of the coastal center of
Mackay and 171 km by rail from the Abbot Point coal terminal.
MineSite Technologies' Impact Digital Network has been approved
by MSHA
for use in underground coal mines, meeting all requirements for
communications and tracking under the MINER Act 2006. The
Wireless Network Switches that are an integral part of the
digital backbone also act as readers for RFID tags which are
carried by miners underground. MST's MinePhone is in the final
stages of approval. Visit
www.minesite.com/au
Eriez, Erie, PA, introduces CoalPro Column Flotation Cells,
ideal for efficient recovery of fine coal (0.2mm) particles.
The high-capacity columns with low operating and maintenance
costs feature Slam-Jet spargers for greater plant yield. Design
features include multi-point feed distribution, internal product
launders, and a removable self-closing air sparging system
(Slam-Jet). Call 888/300-3743.
Larson Electronics announces the addition of a 50 watt HID
remote controlled spotlight to complement its 35 watt HID
Golight
upgrade spotlights. The upgrade to the K&H Nightray spotlight
creates 4500 lumens of bright, white light reaching distances of
more than 4000 feet. Equipped with a magnetic base, detachable
cord and handheld wireless remote control. Larson now produces
the RCL360-HID-RF-M. Call 800/369-6671.
Snap-On Industrial, Kenosha, WI, introduces the Level 5 NTC
(Networkable Tool Control) system
that offers users the opportunity to manage a virtually
unlimited number of lockable tool storage units simultaneously
for complete system control. A proprietary keyless entry allows
for access to the tools needed while the NTC system tracks
access based on ID key cards. All tools in the system can be
serialized and linked to a specific box with the bar-code
mechanism used for check out and return. Call Steve Wilcox at
262/754-9550.
Leica Geosystems, Norcross, GA, introduces the Leica Zeno GIS
series, part of the Leica Viva family of products.
The new series makes it simpler to manage and maintain assets,
inspect infrastructure, respond to emergencies, ensure public
safety, explore natural resources and conduct as-built and
incident mapping with ease. Leica Zeno 10 provides a color
graphic display in portrait format and a numeric keypad. Call
Andy Ribeiro at 770/326-9557.
MPS
Centurion (Mine & Process Service, Inc.), Kewanee, IL,
introduces the S22 High Temperature Hardhat
that meets ANSI Standards Z89.1-2003, Type 1, Class C.
Resistant to radiant temperatures of up to 500 degrees C,
and suitable for a wide range of applications where workers are
exposed to high temperatures. Available with a range of
accessories including face protection and heat resistant capes.
Call 800/852-6529.
Master Magnetics, Inc., Castle Rock, CO, introduces a new line
of magnetic sweepers, super-powered permanent magnet assemblies
ranging from 12" to 96" in width and designed for fast removal
of hazardous scrap metal debris. The new 36" and 48" hang-type
sweepers feature a release handle for quick and safe release of
collected material. The new 18" push-type sweeper features a
quick-release handle for fast and easy release of collected
metal debris. Call 888/293-9399.
LADD
Industries announces the new Deutsch Industrial DTM series
connectors for high temperature environments.
The new DTMH connectors are manufactured from temperature
resistant thermoplastic, and are designed for applications with
temperatures ranging from -55 degrees C to 150
degrees C, ideal for use anywhere the electrical
system could be exposed to higher than normal temperatures.
Call Kari Nettleship at 888/523-3462.
Talbert Manufacturing, Rensselaer, IN, introduces the 55SA
Trailer,
outfitted with The Equalizer that features a new
nitrogen-assisted dampening system, which hydraulically
transfers loads in all terrains. Available for us with Talbert
55SA (55 ton) and 60SA (60 ton) 3+1 spread axle series trailers
and axle attachments. The 55SA is a hydraulic detachable
gooseneck trailer that features a non-ground bearing hydraulic
gooseneck design, a 108" swing radius, a 25' deck length and
8'6" deck width. Call Greg Smith at 219/866-7141.
Climax Portable Machine Tools, Newberg, OR, introduces a new
line of versatile flange facers,
ideal for in-situ repair and on-site machining of demanding
flange surfaces. The new flange facers' operating power and
rigid design enable fast and accurate metals removal. Operators
can adjust the feed rate while the machine is still running
without having to reach into the machine. A turning arm and
tool head rotate a full 360 degrees. Contact Andy Becker at
503/538-2185.
ECCO,
Boise, ID, introduces the 9021 concealed warning light, an
extension of the 9011 line that features one controller and two
heads.
Simple installation and minimal cost. Four 1-watt
high-intensity LEDs per head provide exceptional warning and are
specifically designed for vehicle headlight and tail light
applications. Sixteen flash patterns are included and multiple
units can be synchronized to flash alternately or
simultaneously. Call Michelle Goodice at 800/635-5900.
ROTEX Global, LLC, Cincinnati, OH, introduces the GRADEX 2000
Particle Size Analyzer,
a patented PC-controlled device that improves efficiency and
accuracy of quality control programs by providing reliable,
fully automatic sieve analysis. Immediate results in the lab or
on the plant floor. Reduces costs. Full automation provides
analysis on a more frequent and timely basis, allowing for
closer control of raw materials receipts, materials in process,
and finished products. Call 800/453-2321.
Abresist Corporation, a Kaleborn Company, announces that its
Quality Management System has been certified
as compliant with ISO 9001:2008. Abresist is a custom
manufacturer of wear resistant linings for a variety of
processing equipment including hydraulic and pneumatic
components and pipe handling large quantities of bulk
materials. Call Joe Accetta at 800/348-0717.
Godwin Pumps, Bridgeport, NJ, introduces two new pumps
-- the Model HL260M 10" x 8" single-stage automatic priming
centrifugal Dri-Prime pump for high heads and the Model
CD500M-24" x 18" automatic priming centrifugal Dri-Prime pump
for high flows. Call Stephanie Hassler at 856/467-3636.
Boart Longyear, Salt Lake City, UT, introduces a new line of
surface-set bits,
including 11 configurations designed to yield deeper penetration
and reduced rod tripping. The Surface Set XP bits last up to
three times longer and eliminates the need to utilize
alternative bits in inconsistent ground formations. The bits'
patented RazerCut face design increases productivity by exposing
the impregnated diamonds. Call James Burris at 801/401-3744.
ABB's (New Berlin, WI) new drive module ACS850 is now available
and UL listed up to 600 HP. Features on-board safe-torque-off,
a removable memory block, intelligent user interface with a
series of assistant wizards, a built-in energy saving
calculator, and modular hardware and software. Includes an
advanced adaptation of ABB's high-performance motor-control
platform, Direct Torque Control. Call Ken Graver at
262/780-3873.
DURALINE
LLC has been supplying its Duraline Z-100 Heavy Duty Wear Lining
material
to the Mining and Coal Preparation, and Mineral Preparation
Industry in the USA including PA, WV, KY and TN for over 40
years. This cost-effective material is being supplied to and is
utilized by Coal Preparation Plants and Mineral Preparation
Plants in chutes, sumps, underflow pans, hoppers, cyclones,
storage bins and silos, etc. DURALINE LLC is proud to include
the largest Coal Preparation Plant in the USA as one of its
oldest customers.
In addition to DURALINE LLC's original Z-100 wear resistant
product, it offers a line of highly abrasion and corrosion
resistant Duraline Duraclad Ceramic Beaded Epoxy Resin
lining/coating products and Tile Adhesives. The revolutionary
Duraline "FAST SET" Ceramic Beaded C-301FS wear resistant Epoxy
Resin is especially formulated to allow "quick cure/short down
time" repairs in as little as 30 minutes.
DURALINE has recently made the packaging of their Ceramic Beaded
Epoxy Resins even more user friendly by providing one part of
the two part mix in a mixing vessel "tub" that eliminates the
need for a separate mixing bucket. This saves money and time in
looking for a mixing pot.
Duraline now produces a Heavy Duty Industrial Floor material
aimed at Mining Floors, Metals Plants, Recycling Plants, and
any industrial floor application with severe duty requirements.
This product can also be furnished with SS or Synthetic fibers
for extra strength.
Additionally, for Extreme Special Duty, DURALINE also offers a
Premier Severe Duty EPOXY POLYMER FLOOR CONCRETE named
HD-200-IF. This material is extremely corrosion and abrasion
resistant.
DURALINE LLC has announced that Duraline Z-100 is now available
with Stainless Steel and other Fibers. The addition of Duraline
Fibers enhances the thermal and mechanical shock resistance, and
further increases the overall strength of this proven and cost
effective product. The Duraline Z-100 (SSF) can be installed
by troweling or guniting.
DURALINE LLC can be contacted at:
Duraline@verizon.net
or call 412/429-0335 or
F: 412/429-0336, or
visit
www.duraline-inc.com
|
